| MRC | Criteria | Characteristic |
|---|
| AAPN | SECTION QUANTITY | 1 |
| AAQL | BODY STYLE | CYLINDRICAL SERVO MOUNTED |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| AAVL | PILOT DIAMETER | 0.4000 INCHES NOMINAL |
| AAVM | PILOT LENGTH | 0.0400 INCHES NOMINAL |
| ABPA | UNDERCUT DIAMETER | 0.531 INCHES NOMINAL |
| ABPC | UNDERCUT WIDTH | 0.6200 INCHES NOMINAL |
| ABPM | BODY DIAMETER | 0.531 INCHES NOMINAL |
| ABWV | SHAFT DIAMETER | 0.0932 INCHES MINIMUM AND 0.0935 INCHES MAXIMUM |
| ABXF | SHAFT LENGTH | 0.690 INCHES NOMINAL |
| ADAQ | BODY LENGTH | 1.094 INCHES NOMINAL |
| AECZ | MOUNTING LIP DIAMETER | 0.5310 INCHES NOMINAL |
| AEDA | MOUNTING LIP DEPTH | 0.0310 INCHES NOMINAL |
| AEDX | SHAFT STYLE | ROUND |
| AEDZ | SHAFT BEARING TYPE | BEARING |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 3600.0 NOMINAL |
| AEFK | MAXIMUM STARTING TORQUE | 0.40 INCH-OUNCES |
| AEFL | MAXIMUM RUNNING TORQUE | 0.30 INCH-OUNCES |
| AEFY | SHAFT END PLAY | 0.005 INCHES |
| AEFZ | SHAFT RUNOUT | 0.002 INCHES |
| AEGB | PILOT DIAMETER RUNOUT | 0.002 INCHES |
| AEGC | SHAFT RADIAL PLAY | 0.002 INCHES |
| AEGD | MECHANICAL BACKLASH IN DEG ANGULAR ROTATION | 1.5 |
| APXH | TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| AXGY | MOUNTING METHOD | CLAMP RING |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 10.0 KILOHMS SINGLE SECTION |
| CQCH | TAP LOCATION FROM CCW TERMINAL PER SECTION IN DEG OF EFFECTIVE ELECTRICAL ROTATION | 1800.0 SINGLE SECTION |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 3600.0 NOMINAL |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.50/+0.50 SINGLE SECTION |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 125.0 SINGLE SECTION |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -20.0/+20.0 SINGLE SECTION |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 2.5 FREE AIR SINGLE SECTION |
| CRGM | FUNCTION CONFORMITY PER SECTION | SINGLE SECTION INDEPENDENT LINEARITY |
| CRKS | TAP LOCATION TOLERANCE PER SECTION | -1.0/+1.0 DEG ANGULAR ROTATION SINGLE SECTION |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -5.0/+5.0 SINGLE SECTION |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CLUTCH |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | SINGLE SECTION LINEAR |
| CSCY | TEMP COEFFICIENT OF RESISTANCE WIRE PER SECTION IN PPM PER DEG CELSIUS | -20.0/+20.0 SINGLE SECTION |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 40.0 SINGLE SECTION |
| TEST | TEST DATA DOCUMENT | 06481-914035 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWI |
| TTQY | TERMINAL TYPE AND QUANTITY | 3 TURRET |
