| MRC | Criteria | Characteristic |
|---|
| ABHP | OVERALL LENGTH | 15.500 INCHES NOMINAL |
| BYFR | TEETH HARDNESS RATING | 56.0 ROCKWELL C MINIMUM AND 62.0 ROCKWELL C MAXIMUM |
| CFFB | WORM THREAD QUANTITY | 1 |
| CFFC | WORM THREAD LEAD | 0.500 INCHES NOMINAL |
| CFFD | WORM THREAD DIRECTION | RIGHT-HAND |
| CFFF | WORM PRESSURE ANGLE IN DEG | 20.000 |
| CFFG | WORM HELIX ANGLE | 4 DEG 33 MIN |
| CFFK | WORM OUTSIDE DIAMETER | 2.3155 INCHES NOMINAL |
| CFFL | WORM PITCH DIAMETER | 2.000 INCHES NOMINAL |
| CFFM | SHAFT HARDNESS RATING | 56.0 ROCKWELL C MINIMUM AND 62.0 ROCKWELL C MAXIMUM |
| CFFN | WORM THREAD SECTION LENGTH | 2.625 INCHES NOMINAL |
| CFFP | WORM BODY LENGTH | 4.096 INCHES NOMINAL |
| CFFQ | WORM BODY TAPERED BEARING SURFACE END | PROVIDED |
| CFFR | TAPERED BEARING SURFACE LARGEST DIAMETER | 1.3605 INCHES NOMINAL |
| CFFS | TAPERED BEARING SURFACE SMALLEST DIAMETER | 1.1545 INCHES NOMINAL |
| CFFT | TAPERED BEARING SURFACE LENGTH | 0.4055 INCHES NOMINAL |
| CFFW | SHAFT LOCATION | ONE END OF WORM |
| CFFX | STRAIGHT UNTHREADED LENGTH | 3.000 INCHES NOMINAL FIRST END, SECOND PORTION |
| CFFX | STRAIGHT UNTHREADED LENGTH | 7.447 INCHES NOMINAL FIRST END, FIRST PORTION |
| CFFY | STRAIGHT UNTHREADED SECTION DIAMETER | 0.969 INCHES NOMINAL FIRST END, FIRST PORTION |
| CFFY | STRAIGHT UNTHREADED SECTION DIAMETER | 0.999 INCHES MINIMUM FIRST END, SECOND PORTION |
| CFFY | STRAIGHT UNTHREADED SECTION DIAMETER | 1.000 INCHES MAXIMUM FIRST END, SECOND PORTION |
| CFFZ | UNTHREADED SECTION KEYWAY WIDTH | 0.2487 INCHES MINIMUM FIRST END, SECOND PORTION |
| CFFZ | UNTHREADED SECTION KEYWAY WIDTH | 0.2505 INCHES MAXIMUM FIRST END, SECOND PORTION |
| CFGB | UNTHREADED SECTION KEYWAY DEPTH | 0.334 INCHES NOMINAL FIRST END, SECOND PORTION |
| CFGC | UNTHREADED SECTION PIN HOLE DIAMETER | 0.2500 INCHES MINIMUM FIRST END, SECOND PORTION |
| CFGC | UNTHREADED SECTION PIN HOLE DIAMETER | 0.2520 INCHES MAXIMUM FIRST END, SECOND PORTION |
| MATT | MATERIAL | STEEL,QQ-S-624,FS5120 |
