| MRC | Criteria | Characteristic |
|---|
| AAFZ | BODY MATERIAL | STEEL, AISI C1015 |
| AAHB | FIRST END OUTSIDE DIAMETER | 0.625 INCHES NOMINAL ALL WORKING ENDS |
| ABDR | MOUNTING PROVISION | THREADED MOUNTING HOLES |
| ABJH | TEMP RATING | -10.0 DEG FAHRENHEIT AND 165.0 DEG FAHRENHEIT |
| ABKW | OVERALL HEIGHT | 2.500 INCHES NOMINAL |
| ABMK | OVERALL WIDTH | 2.500 INCHES NOMINAL |
| ABXV | BORE DIAMETER | 1.500 INCHES NOMINAL |
| AFDS | LONGEST HORIZONTAL DISTANCE BETWEEN MOUNTING CENTERS | 0.750 INCHES NOMINAL |
| AFDV | LONGEST VERTICAL DISTANCE BETWEEN MOUNTING CENTERS | 84.875 INCHES NOMINAL |
| AKBM | MOUNTING FACILITY THREAD CLASS | 2B |
| AKBN | MOUNTING FACILITY THREAD DIRECTION | RIGHT-HAND |
| AMEA | FIRST END EXTERNAL THREAD LENGTH | 0.375 INCHES NOMINAL ALL WORKING ENDS |
| AMQZ | COMPRESSED LENGTH | 92.875 INCHES NOMINAL |
| ATEM | EXTENDED LENGTH | 174.875 INCHES NOMINAL |
| BBBW | MOUNTING PROVISION ARRANGEMENT STYLE | FOUR HOLE RECTANGULAR |
| BGST | PRESSURE RATING | 1500.0 POUNDS PER SQUARE INCH MINIMUM AND 1650.0 POUNDS PER SQUARE INCH MAXIMUM |
| CBBL | FEATURES PROVIDED | CUSHIONED STROKE |
| CDTD | MOUNTING FACILITY THREAD SERIES DESIGNATOR | UNC |
| CDTF | MOUNTING FACILITY THREAD DIAMETER | 0.375 INCHES NOMINAL |
| CDTG | MOUNTING FACILITY THREAD QUANTITY PER INCH | 16 |
| CKRM | INTEGRAL VALVE OPERATION METHOD | HYDRAULIC |
| CKSD | DESIGN CHARACTERISTICS | SINGLE ACTING SINGLE CYLINDER |
| CKSF | FIRST PISTON ROD END STYLE | EXTERNAL THREADED ALL WORKING ENDS |
| CKSG | FIRST PISTON ROD END THREAD SERIES DESIGNATOR | UNC ALL WORKING ENDS |
| CKSH | FIRST PISTON ROD END THREAD DIAMETER | 0.625 INCHES NOMINAL ALL WORKING ENDS |
| CKSJ | FIRST PISTON ROD END THREAD QUANTITY PER INCH | 11 ALL WORKING ENDS |
| CKSK | FIRST PISTON ROD END THREAD CLASS | 2A ALL WORKING ENDS |
| CKSL | FIRST PISTON ROD END THREAD DIRECTION | RIGHT-HAND ALL WORKING ENDS |
| CLML | MOUNTING TYPE AND LOCATION | FLANGE CYLINDER HEAD END AND SCREW BOTH ENDS |
| CLMN | MOUNTING FACILITY THREAD LENGTH | 0.375 INCHES NOMINAL |
| CLMS | PORT LOCATION AND QUANTITY | 1 CYLINDER HEAD END AND 1 PISTON ROD END |
| CLMT | PORT STYLE | GASKET SEAL ALL PORTS |
| CLMW | PORT THREAD SERIES DESIGNATOR | UN ALL PORTS |
| CLMX | PORT THREAD DIAMETER | 1.062 INCHES NOMINAL ALL PORTS |
| CLMY | PORT THREAD QUANTITY PER INCH | 12 ALL PORTS |
| CLNB | PORT THREAD CLASS | 2B ALL PORTS |
| FEAT | SPECIAL FEATURES | 2.50 X 4.25 IN. FLANGE; W/ VITON SEALS,PISTON LIP SEAL,NEEDLE AND CHECK VALVES; PISTON ROD FLATTED 0.500 IN. LG,0.375 IN. ACROSS FLATS,BEYOND THD PORTION OF ROD |
