| MRC | Criteria | Characteristic |
|---|
| AARX | INSIDE DIAMETER | 0.500 INCHES NOMINAL |
| ABJH | TEMP RATING | -40.0 DEG FAHRENHEIT AND 250.0 DEG FAHRENHEIT SINGLE RESPONSE |
| ABKV | OUTSIDE DIAMETER | 0.920 INCHES NOMINAL |
| CQJX | NOMINAL THREAD SIZE | 0.812 INCHES 1ST END |
| CRFY | FLOW ANGLE | 90.0 DEGREES 2ND END |
| CRXX | MEASURING METHOD AND LENGTH | 32.000 INCHES NOMINAL WORKING |
| MEDA | MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON AND HYDRAULIC FLUID, WATER BASE SINGLE RESPONSE |
| CQGH | (NON-CORE DATA) FIRST END FITTING/COMPONENT AND MATERIAL | COMPLETE FITTING STEEL |
| CRZY | (NON-CORE DATA) SECOND END SWIVEL ACTION CAPABILITY | NOT INCLUDED |
| AAJD | THREAD CLASS | 3B 1ST END 3B 2ND END |
| CQBB | (NON-CORE DATA) SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL |
| SR-1 | SPEC/STD CONTROLLING DATA | |
| THSD | THREAD SERIES DESIGNATOR | UN 1ST END UN 2ND END |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH |
| CQBG | (NON-CORE DATA) FIRST END SWIVEL ACTION CAPABILITY | NOT INCLUDED |
| SR-1 | MANUFACTURERS CODE | 19207 |
| ADJM | (NON-CORE DATA) INNER CONVEYING TUBE MATERIAL | RUBBER, SYNTHETIC |
| CRBL | (NON-CORE DATA) SECOND END FITTING/COMPONENT AND MATERIAL | COMPLETE FITTING STEEL |
| AGAV | END ITEM IDENTIFICATION | 2350-01-390-4683 |
| SR-1 | MFR SOURCE CONTROLLING REFERENCE | 12365278-52 |
| CQCS | LAYER COMPOSITION AND LOCATION | 1ST LAYER SPIRALLY LAID STEEL WIRE 2ND LAYER SPIRALLY LAID STEEL WIRE 3RD LAYER SPIRALLY LAID STEEL WIRE 4TH LAYER SPIRALLY LAID STEEL WIRE OUTER LAYER MOLDED RUBBER, SYNTHETIC |
| CRDW | HYDROSTATIC TEST PRESSURE | 10000.0 POUNDS PER SQUARE INCH |
| AKUU | END CONNECTION DESIGN | STRAIGHT 1ST END ELBOW 2ND END |
| CMLP | THREAD QUANTITY PER INCH | 16 1ST END 16 2ND END |
| CQGM | MAXIMUM OPERATING PRESSURE | 5000.0 POUNDS PER SQUARE INCH |
| AAGR | CROSS-SECTIONAL SHAPE STYLE | ROUND |
| AHNC | CONNECTION STYLE | SWIVEL NUT, GASKET SEAL 1ST END SWIVEL NUT, GASKET SEAL 2ND END |
| CQBD | BURST TEST PRESSURE | 20000.0 POUNDS PER SQUARE INCH |
| AAJF | THREAD DIRECTION | RIGHT-HAND 2ND END |
| ACKH | MINIMUM INSIDE BENDING RADIUS | 7.000 INCHES |
| AKXL | END FITTING COMPONENT AND MATERIAL | COMPLETE FITTING STEEL ALL ENDS |
| AWLS | CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END |
| FEAT | SPECIAL FEATURES | INNER CONVEYING TUBE MATERIAL-RUBBER, SYNTHETIC |
