| MRC | Criteria | Characteristic |
|---|
| AAQL | BODY STYLE | RELIEVED |
| AAWX | CONCENTRIC HOLE DEPTH | 2.000 INCHES MINIMUM AND 2.250 INCHES MAXIMUM |
| AAXC | CONCENTRIC HOLE DIAMETER | 0.250 INCHES MINIMUM AND 0.280 INCHES MAXIMUM |
| ABHP | OVERALL LENGTH | 3.097 INCHES MINIMUM AND 3.112 INCHES MAXIMUM |
| ACKM | FIRST END CONNECTION TYPE | THREADED EXTERNAL TUBE |
| ACKN | FIRST END STYLE DESIGNATOR | PLAIN |
| ACLK | FIRST END THREAD CLASS | 3A |
| ACLL | FIRST END THREAD DIRECTION | RIGHT-HAND |
| ASDB | WIDTH ACROSS FLATS | 1.052 INCHES MINIMUM AND 1.064 INCHES MAXIMUM |
| ATKZ | FIRST END THREAD LENGTH | 0.580 INCHES NOMINAL |
| BBDF | WRENCHING FEATURE STYLE | HEXAGON |
| BBKL | FIRST DIAMETER FROM WRENCHING FEATURE | 0.742 INCHES MINIMUM AND 0.745 INCHES MAXIMUM |
| BBKM | SECOND DIAMETER FROM WRENCHING FEATURE | 0.730 INCHES MINIMUM AND 0.740 INCHES MAXIMUM |
| BBKN | THIRD DIAMETER FROM WRENCHING FEATURE | 0.749 INCHES NOMINAL |
| BBKP | FOURTH DIAMETER FROM WRENCHING FEATURE | 0.534 INCHES MINIMUM AND 0.544 INCHES MAXIMUM |
| BBKR | LENGTH FROM BEARING SURFACE OF WRENCHING FEATURE TO END OF FIRST DIAMETER | 0.075 INCHES NOMINAL |
| BBKS | LENGTH FROM BEARING SURFACE OF WRENCHING FEATURE TO END OF SECOND DIAMETER | 1.000 INCHES NOMINAL |
| BBKT | LENGTH FROM BEARING SURFACE OF WRENCHING FEATURE TO END OF THIRD DIAMETER | 1.982 INCHES NOMINAL |
| BBKW | LENGTH FROM BEARING SURFACE OF WRENCHING FEATURE TO END OF FOURTH DIAMETER | 2.142 INCHES NOMINAL |
| BBKY | FIRST RADIAL FLUID HOLE DIAMETER | 0.060 INCHES NOMINAL |
| BBLB | DISTANCE FROM FIRST RADIAL HOLE CENTER TO END OF BOLT | 1.722 INCHES NOMINAL |
| BBLD | LENGTH FROM BEARING SURFACE OF WRENCHING FEATURE TO BOLT END | 2.722 INCHES NOMINAL |
| BBLF | WRENCHING FEATURE HEIGHT | 0.350 INCHES MINIMUM AND 0.375 INCHES MAXIMUM |
| CQBC | MINIMUM TENSILE STRENGTH | 180000 POUNDS PER SQUARE INCH |
| CQKK | FIRST END THREAD QUANTITY PER INCH | 18 |
| CQMM | FIRST END THREAD SERIES DESIGNATOR | UNJF |
| CQYM | FIRST END NOMINAL THREAD SIZE | 0.625 INCHES |
| FEAT | SPECIAL FEATURES | FITTING,LUBRICTION PART NO. MS15001-1 IN THD END |
| MATT | III MATERIAL | STEEL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5626,COND C4 MIL SPEC SINGLE MATERIAL RESPONSE |
| SFTT | SURFACE TREATMENT | CADMIUM |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | LC+77-1061 MFR REF SINGLE TREATMENT RESPONSE |
| TEST | TEST DATA DOCUMENT | 36659-LC+72-1076 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTIN |
