| MRC | Criteria | Characteristic |
|---|
| AAPN | SECTION QUANTITY | 4 |
| AAQL | BODY STYLE | CYLINDRICAL SERVO MOUNTED |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| AAVL | PILOT DIAMETER | 1.5610 INCHES MINIMUM AND 1.5620 INCHES MAXIMUM |
| AAVM | PILOT LENGTH | 0.0620 INCHES NOMINAL |
| ABPA | UNDERCUT DIAMETER | 1.561 INCHES MINIMUM AND 1.562 INCHES MAXIMUM |
| ABPC | UNDERCUT WIDTH | 0.0730 INCHES MINIMUM |
| ABPM | BODY DIAMETER | 1.750 INCHES NOMINAL |
| ABWV | SHAFT DIAMETER | 0.2494 INCHES MINIMUM AND 0.2499 INCHES MAXIMUM |
| ABXF | SHAFT LENGTH | 0.718 INCHES MINIMUM AND 0.782 INCHES MAXIMUM |
| ADAQ | BODY LENGTH | 2.681 INCHES MAXIMUM |
| AECZ | MOUNTING LIP DIAMETER | 1.7500 INCHES NOMINAL |
| AEDA | MOUNTING LIP DEPTH | 0.0930 INCHES NOMINAL |
| AEDX | SHAFT STYLE | ROUND |
| AEDZ | SHAFT BEARING TYPE | BALL |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 335.0 MINIMUM AND 337.0 MAXIMUM |
| AEFK | MAXIMUM STARTING TORQUE | 0.70 INCH-OUNCES |
| AEFL | MAXIMUM RUNNING TORQUE | 0.60 INCH-OUNCES |
| AEFY | SHAFT END PLAY | 0.005 INCHES |
| AEFZ | SHAFT RUNOUT | 0.001 INCHES |
| AEGA | LATERAL RUNOUT | 0.002 INCHES |
| AEGB | PILOT DIAMETER RUNOUT | 0.001 INCHES |
| AEGC | SHAFT RADIAL PLAY | 0.001 INCHES |
| AFJN | III FRAGILITY FACTOR | MODERATELY RUGGED |
| APXH | TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| AXGY | MOUNTING METHOD | CLAMP RING |
| CBBL | FEATURES PROVIDED | HUMIDITY PROOF |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 125.0 KILOHMS 1ST SECTION |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 200.0 KILOHMS 4TH SECTION |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 50.0 KILOHMS 2ND SECTION |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 50.0 KILOHMS 3RD SECTION |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 360.0 NOMINAL |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.25 TO 0.25 2ND SECTION |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.25 TO 0.25 3RD SECTION |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.50 TO 0.50 1ST SECTION |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 90.0 ALL SECTIONS |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -20.0 TO 20.0 ALL SECTIONS |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 2.5 FREE AIR ALL SECTIONS |
| CRGM | FUNCTION CONFORMITY PER SECTION | 1ST SECTION INDEPENDENT LINEARITY |
| CRGM | FUNCTION CONFORMITY PER SECTION | 2ND SECTION INDEPENDENT LINEARITY |
| CRGM | FUNCTION CONFORMITY PER SECTION | 3RD SECTION INDEPENDENT LINEARITY |
| CRJS | FIXED TAP QUANTITY PER SECTION | 1 ALL SECTIONS |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -5.0 TO 5.0 ALL SECTIONS |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | 1ST SECTION LINEAR |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | 2ND SECTION LINEAR |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | 3RD SECTION LINEAR |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 60.0 ALL SECTIONS |
| FEAT | SPECIAL FEATURES | SECTIONS 1-3 ARE PRECISION VARIABLE RESISTORS AND SECTION 4 IS NOT |
| TTQY | TERMINAL TYPE AND QUANTITY | 16 TAB, SOLDER LUG |
