| MRC | Criteria | Characteristic |
|---|
| AAPE | TEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS | -50.0 TO 50.0 FIRST TEMP COEFFICIENT |
| AAPP | ELECTRICAL RESISTANCE | 10.000 KILOHMS 2ND INTERMEDIATE RESISTANCE VALUE |
| AAPP | ELECTRICAL RESISTANCE | 15.000 OHMS LOWEST RESISTANCE VALUE |
| AAPP | ELECTRICAL RESISTANCE | 27.400 KILOHMS HIGHEST RESISTANCE VALUE |
| AAPP | ELECTRICAL RESISTANCE | 442.000 OHMS 1ST INTERMEDIATE RESISTANCE VALUE |
| AAPQ | RESISTANCE TOLERANCE IN PERCENT | -1.000 TO 1.000 1ST INTERMEDIATE RESISTANCE VALUE |
| AAPQ | RESISTANCE TOLERANCE IN PERCENT | -1.000 TO 1.000 2ND INTERMEDIATE RESISTANCE VALUE |
| AAPQ | RESISTANCE TOLERANCE IN PERCENT | -1.000 TO 1.000 HIGHEST RESISTANCE VALUE |
| AAPQ | RESISTANCE TOLERANCE IN PERCENT | -5.000 TO 5.000 LOWEST RESISTANCE VALUE |
| AAQF | AMBIENT TEMP IN DEG CELSIUS AT FULL RATED POWER | 125.0 |
| AAQG | AMBIENT TEMP IN DEG CELSIUS AT ZERO PERCENT RATED POWER | 150.0 |
| AAQH | TEMP RANGE OF TEMP COEFFICIENT IN DEG CELSIUS | -55.0 TO 150.0 TEMP RANGE OF FIRST TEMP COEFFICIENT |
| AAQZ | INCLOSURE METHOD | ENCAPSULATED |
| AARA | TERMINAL QUANTITY | 14 |
| AARB | TERMINAL TYPE | TAB, SOLDER LUG |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ABJT | TERMINAL LENGTH | 0.125 INCHES MINIMUM |
| ADAQ | BODY LENGTH | 0.796 INCHES MAXIMUM |
| ADAT | BODY WIDTH | 0.280 INCHES NOMINAL |
| ADAU | BODY HEIGHT | 0.200 INCHES MAXIMUM |
| AEFB | POWER DISSIPATION RATING IN WATTS | 0.144 TOTAL NETWORK |
| AFWW | TERMINAL WIDTH | 0.014 INCHES MINIMUM AND 0.026 INCHES MAXIMUM |
| AGAV | END ITEM IDENTIFICATION | F100-PW-220 |
| CQRD | IDENTICAL VALUE RESISTOR QUANTITY | 1 1ST INTERMEDIATE RESISTANCE VALUE |
| CQRD | IDENTICAL VALUE RESISTOR QUANTITY | 1 LOWEST RESISTANCE VALUE |
| CQRD | IDENTICAL VALUE RESISTOR QUANTITY | 2 HIGHEST RESISTANCE VALUE |
| CQRD | IDENTICAL VALUE RESISTOR QUANTITY | 4 2ND INTERMEDIATE RESISTANCE VALUE |
| PKWT | UNPACKAGED UNIT WEIGHT | 2.0 GRAMS |
| STYL | STYLE DESIGNATOR | DUAL INLINE |
| TEST | TEST DATA DOCUMENT | 73030-5E4790/24 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DR |
