| MRC | Criteria | Characteristic |
|---|
| AAPN | SECTION QUANTITY | 2 |
| AAQL | BODY STYLE | RECTANGULAR BUSHING MOUNTED |
| ABJT | TERMINAL LENGTH | 0.250 INCHES NOMINAL |
| ABWV | SHAFT DIAMETER | 0.249 INCHES MINIMUM AND 0.251 INCHES MAXIMUM |
| ABXF | SHAFT LENGTH | 1.093 INCHES MINIMUM AND 1.156 INCHES MAXIMUM |
| ADAP | MOUNTING BUSHING LENGTH | 0.375 INCHES NOMINAL |
| ADAU | BODY HEIGHT | 0.625 INCHES NOMINAL |
| AEDQ | UNDERCUT DIAMETER | 0.124 INCHES MINIMUM AND 0.126 INCHES MAXIMUM |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 234.0 MINIMUM AND 246.0 MAXIMUM |
| AEFK | MAXIMUM STARTING TORQUE | 2.00 INCH-OUNCES |
| AEFL | MAXIMUM RUNNING TORQUE | 2.00 INCH-OUNCES |
| AEFM | MAXIMUM STOP TORQUE | 20.00 INCH-OUNCES |
| AEFP | NONTURN DEVICE RADIUS | 0.300 INCHES MINIMUM AND 0.310 INCHES MAXIMUM |
| AEHT | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | 0.195 INCHES MINIMUM AND 0.205 INCHES MAXIMUM |
| AFJN | III FRAGILITY FACTOR | MODERATELY RUGGED |
| AGAV | III END ITEM IDENTIFICATION | AWADS RADAR |
| AJYN | SCREW THREAD DIAMETER | 0.375 INCHES NOMINAL |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNEF |
| AYQR | CENTER TO CENTER DISTANCE BETWEEN TERMINAL ROWS | 0.195 INCHES MINIMUM AND 0.205 INCHES MAXIMUM |
| CBME | III CUBIC MEASURE | 0.452 CUBIC INCHES |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 5.0 KILOHMS ALL SECTIONS |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 295.0 MINIMUM AND 305.0 MAXIMUM |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 125.0 ALL SECTIONS |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 1.0 FREE AIR ALL SECTIONS |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | STOPS |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 70.0 ALL SECTIONS |
| AJYQ | SCREW THREAD QUANTITY PER INCH | 32.0 |
| APXH | TERMINAL LOCATION | LOWER ADJACENT SIDE TWO ROWS |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -150.0 TO 150.0 ALL SECTIONS |
| TTQY | TERMINAL TYPE AND QUANTITY | 6 PIN |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ADAQ | BODY LENGTH | 1.094 INCHES MINIMUM AND 1.156 INCHES MAXIMUM |
| AXGY | MOUNTING METHOD | STANDARD BUSHING |
| CQCM | CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL | 0.195 INCHES MINIMUM AND 0.205 INCHES MAXIMUM |
| ADAT | BODY WIDTH | 0.625 INCHES NOMINAL |
| AEDX | SHAFT STYLE | ROUND, STEPPED, KNURLED |
| AEDZ | SHAFT BEARING TYPE | BEARING |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFN | NONTURN DEVICE LOCATION | AT 9 OCLOCK |
| AGQL | UNDERCUT LENGTH | 0.375 INCHES NOMINAL |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -5.0 TO 5.0 ALL SECTIONS |
