| MRC | Criteria | Characteristic |
|---|
| AAQL | BODY STYLE | W/THD MTG HOLE(S)/STUD(S) TERMINALS ON ONE SURFACE |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ABJT | TERMINAL LENGTH | 2.000 INCHES NOMINAL |
| ADAQ | BODY LENGTH | 2.251 INCHES NOMINAL |
| ADAT | BODY WIDTH | 1.875 INCHES NOMINAL |
| ADAU | BODY HEIGHT | 0.500 INCHES NOMINAL |
| AEBK | III MAXIMUM RF CURRENT RATING AT HIGHEST RATED FREQUENCY IN RMS AMPS | 7.15 |
| AEBL | III HIGHEST FREQUENCY AT WHICH RF CURRENT RATING APPLIES IN KILOHERTZ | 30.0 |
| AEBM | III MAXIMUM RF CURRENT RATING AT LOWEST RATED FREQUENCY IN RMS AMPS | 3.4 |
| AEBN | III LOWEST FREQUENCY AT WHICH RF CURRENT RATING APPLIES IN KILOHERTZ | 12.0 |
| AEBT | TERMINAL DIAMETER | 0.064 INCHES NOMINAL |
| AEBY | DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH | 1.983 INCHES NOMINAL |
| AEBZ | SCHEMATIC DIAGRAM DESIGNATOR | ELECTRODE(S) GROUNDED TO CASE |
| AEHA | DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH | 1.607 INCHES NOMINAL |
| AKEJ | MOUNTING FACILITY SCREW THREAD SERIES DESIGNATOR | UNC |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | 4 THREADED MOUNTING HOLES |
| BWGP | SECTION QUANTITY | 4 |
| CBBL | FEATURES PROVIDED | HERMETICALLY SEALED CASE |
| CQBQ | CAPACITANCE VALUE PER SECTION | 200.500 MICROFARADS 3RD SECTION |
| CQJJ | NONDERATED OPERATING TEMP | -55.0 DEG CELSIUS MINIMUM AND 150.0 DEG CELSIUS MAXIMUM |
| CQJX | NOMINAL THREAD SIZE | 0.086 INCHES |
| CQWM | NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION | 1500.0 AC-PEAK ALL SECTIONS |
| CRDN | TEMP COEFFICIENT OF CAPACITANCE RANGE PER SECTION IN PPM PER DEG CELSIUS | -20.0 TO 100.0 SINGLE SECTION |
| CRTP | TOLERANCE RANGE PER SECTION | -1.00 TO 1.00 PERCENT 3RD SECTION |
| CRTP | TOLERANCE RANGE PER SECTION | -1.00 TO 1.00 PERCENT 4TH SECTION |
| CRTP | TOLERANCE RANGE PER SECTION | -2.00 TO 2.00 PERCENT 1ST SECTION |
| CRTP | TOLERANCE RANGE PER SECTION | -2.00 TO 2.00 PERCENT 2ND SECTION |
| CWJK | CASE MATERIAL | METAL |
| CWPK | INSULATION RESISTANCE AT REFERENCE TEMP | 10000.0 MEGOHMS |
| CWQF | QUALITY FACTOR AT REFERENCE TEMP | 10000.0000 |
| CWSG | III TERMINAL SURFACE TREATMENT | SOLDER |
| TTQY | TERMINAL TYPE AND QUANTITY | 4 UNINSULATED WIRE LEAD |
