| MRC | Criteria | Characteristic |
|---|
| ABKW | OVERALL HEIGHT | 1.180 INCHES MAXIMUM |
| ADAQ | BODY LENGTH | 2.750 INCHES MAXIMUM |
| ADAT | BODY WIDTH | 1.250 INCHES MAXIMUM |
| ADAU | BODY HEIGHT | 1.000 INCHES MAXIMUM |
| AEBY | DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH | 2.250 INCHES NOMINAL |
| AECR | VIBRATION RESISTANCE RANGE IN HERTZ | +10.0/+500.0 |
| AFGA | OPERATING TEMP RANGE | -40.0/+85.0 DEG CELSIUS |
| AHAJ | REFERENCE FREQUENCY PER FUNCTION | 7.979 MEGAHERTZ BLANK |
| AHAQ | SOURCE IMPEDANCE RATING PER FUNCTION | 520.0 OHMS BLANK |
| AHAS | LOAD IMPEDANCE PER FUNCTION | 520.0 OHMS BLANK |
| AHBL | PRINCIPAL CIRCUITRY TYPE PER FUNCTION | CRYSTAL BLANK |
| AKEJ | MOUNTING FACILITY SCREW THREAD SERIES DESIGNATOR | UNC |
| AKNA | INCLOSURE TYPE | HERMETICALLY SEALED |
| CQDR | INSERTION LOSS AT REFERENCE FREQUENCY PER FUNCTION IN DECIBELS | 3.0 BLANK |
| CQDW | FUNCTIONAL TERMINAL TYPE AND QUANTITY | 1 PIN INPUT 1ST FUNCTION |
| CQDW | FUNCTIONAL TERMINAL TYPE AND QUANTITY | 1 PIN OUTPUT 2ND FUNCTION |
| CQDW | FUNCTIONAL TERMINAL TYPE AND QUANTITY | 2 PIN GROUND 3RD FUNCTION |
| CQFC | SPECIFIED FREQUENCIES OF DISCRIMINATION PER FUNCTION | 7.95 MEGAHERTZ 1ST BAND PASS 1ST FUNCTION |
| CQFC | SPECIFIED FREQUENCIES OF DISCRIMINATION PER FUNCTION | 7.9682 MEGAHERTZ 2ND BAND PASS 2ND FUNCTION |
| CQFC | SPECIFIED FREQUENCIES OF DISCRIMINATION PER FUNCTION | 7.9898 MEGAHERTZ 3RD BAND PASS 3RD FUNCTION |
| CQFC | SPECIFIED FREQUENCIES OF DISCRIMINATION PER FUNCTION | 7.995 MEGAHERTZ 4TH BAND PASS 4TH FUNCTION |
| CQJX | NOMINAL THREAD SIZE | 0.112 INCHES |
| CRBB | FREQUENCY BAND WIDTH PER FUNCTION | 7.968 MEGAHERTZ 1ST BAND PASS |
| CRBB | FREQUENCY BAND WIDTH PER FUNCTION | 7.9898 MEGAHERTZ 2ND BAND PASS |
| CRBC | DISCRIMINATION AT SPECIFIED FREQUENCIES PER FUNCTION IN DECIBELS | 1.0 MAXIMUM 2ND BAND PASS 2ND FUNCTION |
| CRBC | DISCRIMINATION AT SPECIFIED FREQUENCIES PER FUNCTION IN DECIBELS | 1.0 MAXIMUM 3RD BAND PASS 3RD FUNCTION |
| CRBC | DISCRIMINATION AT SPECIFIED FREQUENCIES PER FUNCTION IN DECIBELS | 40.0 MINIMUM 1ST BAND PASS 1ST FUNCTION |
| CRBC | DISCRIMINATION AT SPECIFIED FREQUENCIES PER FUNCTION IN DECIBELS | 60.0 MINIMUM 4TH BAND PASS 4TH FUNCTION |
| CRTL | CRITICALITY CODE JUSTIFICATION | AHAJ AND CRBB AND CQFC |
| STYL | STYLE DESIGNATOR | RECTANGULAR TERMINAL/TERMINALS ON ONE SURFACE |
| TEST | TEST DATA DOCUMENT | 18876-10179278 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRA |
