| MRC | Criteria | Characteristic |
|---|
| AAFZ | BODY MATERIAL | STEEL, CORROSION RESISTING |
| AAQL | BODY STYLE | STANDARD ROUND B |
| AAVH | SHOULDER DIAMETER | 0.9995 INCHES MINIMUM AND 1.0000 INCHES MAXIMUM |
| AAVL | PILOT DIAMETER | 0.6245 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM |
| ABHP | OVERALL LENGTH | 1.2928 INCHES MINIMUM AND 1.2951 INCHES MAXIMUM |
| ABKK | FLANGE DIAMETER | 1.0570 INCHES MINIMUM AND 1.0650 INCHES MAXIMUM |
| ABKU | FLANGE THICKNESS | 0.0930 INCHES NOMINAL |
| ABPC | UNDERCUT WIDTH | 0.0500 INCHES NOMINAL |
| ABWV | SHAFT DIAMETER | 0.1870 INCHES MINIMUM FRONT SHAFT AND 0.1872 INCHES MAXIMUM FRONT SHAFT |
| ABXF | SHAFT LENGTH | 0.5500 INCHES NOMINAL FRONT SHAFT |
| AHYF | SECURING HOLE QUANTITY | 4 |
| AJSL | BODY SIZE | 10 |
| AJSN | STATOR INPUT VOLTAGE RATING IN VOLTS | 90.0 NOMINAL |
| AJSP | STATOR INPUT CURRENT RATING | 20.0 MILLIAMPERES NOMINAL |
| AJSQ | STATOR INPUT ELECTRICAL POWER RATING | 250.0 MILLIWATTS NOMINAL |
| AJSS | FREQUENCY IN HERTZ | 400.0 NOMINAL |
| AJTG | ZRO IMPEDANCE MAGNITUDE IN OHMS | 5400.00 NOMINAL |
| AJTH | ZRO IMPEDANCE ANGLE IN DEG | 79.00 NOMINAL |
| AJTL | ZRS IMPEDANCE MAGNITUDE IN OHMS | 5400.00 NOMINAL |
| AJTM | ZRS IMPEDANCE ANGLE IN DEG | 79.00 NOMINAL |
| AJTS | ROTOR DC RESISTANCE IN OHMS | 385.00 NOMINAL |
| AJTT | STATOR DC RESISTANCE IN OHMS | 555.00 NOMINAL |
| AJVF | PHASE SHIFT ANGLE IN DEG | 5.000 INPUT TO OUTPUT NOMINAL |
| AJVG | MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | 30.00 OUTPUT |
| AJVH | MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 60.00 |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -7.0/+7.0 |
| AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | 0.07 INCH-OUNCES NOMINAL |
| AJWQ | PILOT LENGTH | 0.0620 INCHES NOMINAL |
| AJWR | SHOULDER LENGTH | 0.0620 INCHES NOMINAL |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | 1.7320 INCHES NOMINAL |
| AJYY | SHAFT THREAD SERIES DESIGNATOR | UNF FRONT SHAFT |
| AKAF | SHAFT THREAD DIRECTION | RIGHT-HAND FRONT SHAFT |
| AKAN | SHAFT THREAD CLASS | 2A FRONT SHAFT |
| AKEJ | MOUNTING FACILITY SCREW THREAD SERIES DESIGNATOR | UNC |
| CQTM | TERMINAL LOCATION | REAR |
| CQWQ | SHAFT THREAD LENGTH | 0.1900 INCHES NOMINAL FRONT SHAFT |
| CRSJ | SHAFT TYPE | ROUND, THREADED FRONT SHAFT |
| CRYY | MOUNTING FACILITY NOMINAL SCREW THREAD DIAMETER | 0.112 INCHES |
| CSJY | TRANSFORMATION RATIO | 0.735 ROTOR TO STATOR NOMINAL |
| CWBH | SHAFT NOMINAL THREAD SIZE | 0.1849 INCHES FRONT SHAFT |
| TTQY | TERMINAL TYPE AND QUANTITY | 6 SCREW |
