| MRC | Criteria | Characteristic |
|---|
| AAFZ | BODY MATERIAL | STEEL, STAINLESS |
| AAQL | BODY STYLE | STANDARD ROUND D |
| AAVH | SHOULDER DIAMETER | 1.9850 INCHES MINIMUM AND 1.9900 INCHES MAXIMUM |
| AAVL | PILOT DIAMETER | 0.5950 INCHES NOMINAL |
| AAZW | SECOND SHOULDER DIAMETER | 1.9985 INCHES MINIMUM AND 1.9995 INCHES MAXIMUM |
| AAZX | SECOND SHOULDER LENGTH | 0.1700 INCHES NOMINAL |
| ABHP | OVERALL LENGTH | 4.2990 INCHES MAXIMUM |
| ABKK | FLANGE DIAMETER | 2.2490 INCHES MINIMUM AND 2.2500 INCHES MAXIMUM |
| ABKU | FLANGE THICKNESS | 0.2500 INCHES NOMINAL |
| ABPM | BODY DIAMETER | 1.9900 INCHES MAXIMUM |
| ABWV | SHAFT DIAMETER | 0.2380 INCHES MINIMUM SINGLE SHAFT AND 0.2405 INCHES MAXIMUM SINGLE SHAFT |
| ABXF | SHAFT LENGTH | 0.7090 INCHES MINIMUM SINGLE SHAFT AND 0.7290 INCHES MAXIMUM SINGLE SHAFT |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| AHCG | MAXIMUM TEMP RISE | 20.0 DEG CELSIUS |
| AJSL | BODY SIZE | 23 |
| AJSR | ROTOR INPUT VOLTAGE RATING IN VOLTS | 115.0 NOMINAL |
| AJSS | FREQUENCY IN HERTZ | 400.0 NOMINAL |
| AJST | ROTOR INPUT CURRENT RATING | 245.0 MILLIAMPERES MAXIMUM |
| AJSV | ROTOR INPUT ELECTRICAL POWER RATING | 1.7 WATTS NOMINAL |
| AJTG | ZRO IMPEDANCE MAGNITUDE IN OHMS | 470.00 MINIMUM AND 580.00 MAXIMUM |
| AJTH | ZRO IMPEDANCE ANGLE IN DEG | 4.00 MINIMUM AND 7.50 MAXIMUM |
| AJTN | ZSS IMPEDANCE MAGNITUDE IN OHMS | 21.60 MINIMUM AND 26.00 MAXIMUM |
| AJTP | ZSS IMPEDANCE ANGLE IN DEG | 42.00 MINIMUM AND 47.00 MAXIMUM |
| AJVF | PHASE SHIFT ANGLE IN DEG | 1.000 INPUT TO OUTPUT NOMINAL |
| AJVG | MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | 32.00 OUTPUT |
| AJVH | MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 48.00 |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -6.0/+6.0 |
| AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | 0.20 INCH-OUNCES MAXIMUM |
| AJWQ | PILOT LENGTH | 0.0430 INCHES NOMINAL |
| AJWR | SHOULDER LENGTH | 0.2500 INCHES NOMINAL |
| AJWV | AFT OF FIRST FLANGE DIAMETER | 1.9985 INCHES MINIMUM AND 1.9995 INCHES MAXIMUM |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | 3.5800 INCHES MAXIMUM |
| AJYY | SHAFT THREAD SERIES DESIGNATOR | UNF SINGLE SHAFT |
| AKAF | SHAFT THREAD DIRECTION | RIGHT-HAND SINGLE SHAFT |
| AKAN | SHAFT THREAD CLASS | 2A SINGLE SHAFT |
| CQTM | TERMINAL LOCATION | REAR |
| CQWQ | SHAFT THREAD LENGTH | 0.4450 INCHES NOMINAL SINGLE SHAFT |
| CRSJ | SHAFT TYPE | ROUND, THREADED SINGLE SHAFT |
| CSJY | TRANSFORMATION RATIO | 0.783 ROTOR TO STATOR NOMINAL |
| CWBH | SHAFT NOMINAL THREAD SIZE | 0.240 INCHES SINGLE SHAFT |
| TTQY | TERMINAL TYPE AND QUANTITY | 6 SCREW |
