| MRC | Criteria | Characteristic |
|---|
| AAFZ | BODY MATERIAL | STEEL, STAINLESS |
| AAQL | BODY STYLE | STANDARD ROUND C |
| AAVH | SHOULDER DIAMETER | 0.9682 INCHES MINIMUM AND 0.9687 INCHES MAXIMUM |
| AAVL | PILOT DIAMETER | 0.6250 INCHES MAXIMUM |
| ABHP | OVERALL LENGTH | 3.1200 INCHES NOMINAL |
| ABKK | FLANGE DIAMETER | 1.0560 INCHES NOMINAL |
| ABKU | FLANGE THICKNESS | 0.0930 INCHES NOMINAL |
| ABPA | UNDERCUT DIAMETER | 0.9500 INCHES MINIMUM AND 0.9800 INCHES MAXIMUM |
| ABPC | UNDERCUT WIDTH | 0.0930 INCHES MINIMUM AND 0.1030 INCHES MAXIMUM |
| ABWV | SHAFT DIAMETER | 0.1050 INCHES NOMINAL SINGLE SHAFT |
| ABXF | SHAFT LENGTH | 0.7930 INCHES NOMINAL SINGLE SHAFT |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| AJSL | BODY SIZE | 11 |
| AJSN | STATOR INPUT VOLTAGE RATING IN VOLTS | 15.0 NOMINAL |
| AJSP | STATOR INPUT CURRENT RATING | 22.0 MILLIAMPERES MAXIMUM |
| AJSQ | STATOR INPUT ELECTRICAL POWER RATING | 160.0 MILLIWATTS MAXIMUM |
| AJSS | FREQUENCY IN HERTZ | 400.0 NOMINAL |
| AJSW | ZRO RESISTANCE IN OHMS | 580.00 NOMINAL |
| AJSY | ZSO RESISTANCE IN OHMS | 370.00 NOMINAL |
| AJTS | ROTOR DC RESISTANCE IN OHMS | 415.00 NOMINAL |
| AJTT | STATOR DC RESISTANCE IN OHMS | 225.00 NOMINAL |
| AJTW | TRANSFORMATION RATIO EQUALITY IN PERCENT | 0.08 NOMINAL |
| AJTX | COMPENSATION METHOD | RESISTOR COMPENSATED |
| AJTY | III ZCO RESISTANCE IN OHMS | 370.00 NOMINAL |
| AJVC | COMPENSATOR DC RESISTANCE IN OHMS | 235.00 NOMINAL |
| AJVD | COMPENSATOR TRANSFORMATION RATIO IN PERCENT | 0.080 ROTOR TO COMPENSATOR NOMINAL |
| AJVF | PHASE SHIFT ANGLE IN DEG | 9.000 INPUT TO OUTPUT NOMINAL |
| AJVG | MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | 15.00 OUTPUT |
| AJVH | MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 14.00 |
| AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | 0.07 INCH-OUNCES NOMINAL |
| AJWQ | PILOT LENGTH | 0.0650 INCHES MAXIMUM |
| AJWR | SHOULDER LENGTH | 0.0620 INCHES MINIMUM AND 0.0680 INCHES MAXIMUM |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | 1.6000 INCHES MINIMUM AND 2.2000 INCHES MAXIMUM |
| CQTM | TERMINAL LOCATION | REAR |
| CQXQ | PLUS J ZRO REACTANCE IN OHMS | 1630.00 NOMINAL |
| CRGZ | PLUS J ZSO REACTANCE IN OHMS | 1400.00 NOMINAL |
| CRSJ | SHAFT TYPE | ROUND, FLATTED SINGLE SHAFT |
| CSJY | TRANSFORMATION RATIO | 1.000 ROTOR TO STATOR NOMINAL |
| CSPK | III PLUS J ZCO REACTANCE IN OHMS | 1400.00 NOMINAL |
| CTJK | SHAFT FLATTED PORTION THICKNESS | 0.1050 INCHES NOMINAL SINGLE SHAFT |
| CWFM | SHAFT FLATTED PORTION LENGTH | 0.6730 INCHES NOMINAL SINGLE SHAFT |
| TTQY | TERMINAL TYPE AND QUANTITY | 12 WIRE LEAD |
