| MRC | Criteria | Characteristic |
|---|
| AAFZ | BODY MATERIAL | ANY ACCEPTABLE |
| AAQL | BODY STYLE | STANDARD ROUND A |
| AAVL | PILOT DIAMETER | 0.5000 INCHES NOMINAL |
| ABHP | OVERALL LENGTH | 1.8750 INCHES NOMINAL |
| ABKK | FLANGE DIAMETER | 0.7470 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM |
| ABKU | FLANGE THICKNESS | 0.0590 INCHES MINIMUM AND 0.0650 INCHES MAXIMUM |
| ABPA | UNDERCUT DIAMETER | 0.6880 INCHES MINIMUM AND 0.6910 INCHES MAXIMUM |
| ABPC | UNDERCUT WIDTH | 0.0590 INCHES MINIMUM AND 0.0650 INCHES MAXIMUM |
| ABWV | SHAFT DIAMETER | 0.3600 INCHES MINIMUM SINGLE SHAFT AND 0.3900 INCHES MAXIMUM SINGLE SHAFT |
| ABXF | SHAFT LENGTH | 0.3750 INCHES NOMINAL SINGLE SHAFT |
| AGAV | END ITEM IDENTIFICATION | B-1B ACFT |
| AJSR | ROTOR INPUT VOLTAGE RATING IN VOLTS | 26.0 NOMINAL |
| AJSS | FREQUENCY IN HERTZ | 400.0 NOMINAL |
| AJST | ROTOR INPUT CURRENT RATING | 109.0 MILLIAMPERES NOMINAL |
| AJSV | ROTOR INPUT ELECTRICAL POWER RATING | 1375.0 MILLIWATTS NOMINAL |
| AJSW | ZRO RESISTANCE IN OHMS | 115.00 NOMINAL |
| AJSY | ZSO RESISTANCE IN OHMS | 70.00 NOMINAL |
| AJTA | ZRS RESISTANCE IN OHMS | 180.00 NOMINAL |
| AJTC | ZSS RESISTANCE IN OHMS | 75.00 NOMINAL |
| AJTE | ZSO-90 RESISTANCE IN OHMS | 47.00 NOMINAL |
| AJTG | ZRO IMPEDANCE MAGNITUDE IN OHMS | 238.00 NOMINAL |
| AJTH | ZRO IMPEDANCE ANGLE IN DEG | 61.00 NOMINAL |
| AJTJ | ZSO IMPEDANCE MAGNITUDE IN OHMS | 87.00 NOMINAL |
| AJTK | ZSO IMPEDANCE ANGLE IN DEG | 41.80 NOMINAL |
| AJTL | ZRS IMPEDANCE MAGNITUDE IN OHMS | 78.50 NOMINAL |
| AJTM | ZRS IMPEDANCE ANGLE IN DEG | 15.50 NOMINAL |
| AJTS | ROTOR DC RESISTANCE IN OHMS | 42.50 MINIMUM AND 57.50 MAXIMUM |
| AJTT | STATOR DC RESISTANCE IN OHMS | 35.70 MINIMUM AND 48.30 MAXIMUM |
| AJVF | PHASE SHIFT ANGLE IN DEG | 20.000 INPUT TO OUTPUT NOMINAL |
| AJVH | MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 30.00 |
| AJWQ | PILOT LENGTH | 0.0380 INCHES MINIMUM AND 0.0430 INCHES MAXIMUM |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | 1.5000 INCHES MAXIMUM |
| CQTM | TERMINAL LOCATION | SIDE |
| CQXQ | PLUS J ZRO REACTANCE IN OHMS | 225.00 NOMINAL |
| CRGZ | PLUS J ZSO REACTANCE IN OHMS | 65.00 NOMINAL |
| CRKL | PLUS J ZRS REACTANCE IN OHMS | 140.00 NOMINAL |
| CRSJ | SHAFT TYPE | ROUND SINGLE SHAFT |
| CSFG | PLUS J ZSS REACTANCE IN OHMS | 20.00 NOMINAL |
| CSJY | TRANSFORMATION RATIO | 0.440 STATOR TO ROTOR MINIMUM AND 0.468 STATOR TO ROTOR MAXIMUM |
| CTDW | PLUS J ZSO-90 REACTANCE IN OHMS | 47.00 NOMINAL |
| TTQY | TERMINAL TYPE AND QUANTITY | 5 WIRE LEAD |
