| MRC | Criteria | Characteristic |
|---|
| AAFZ | BODY MATERIAL | STEEL, CORROSION RESISTING |
| AAQL | BODY STYLE | STANDARD ROUND D |
| AAVH | SHOULDER DIAMETER | 1.9850 INCHES MINIMUM AND 1.9900 INCHES MAXIMUM |
| AAVL | PILOT DIAMETER | 0.5900 INCHES MINIMUM AND 0.6000 INCHES MAXIMUM |
| AAZW | SECOND SHOULDER DIAMETER | 1.9985 INCHES MINIMUM AND 1.9995 INCHES MAXIMUM |
| AAZX | SECOND SHOULDER LENGTH | 0.1700 INCHES NOMINAL |
| ABHP | OVERALL LENGTH | 4.2940 INCHES MAXIMUM |
| ABKK | FLANGE DIAMETER | 2.2490 INCHES MINIMUM AND 2.2500 INCHES MAXIMUM |
| ABKU | FLANGE THICKNESS | 0.2500 INCHES NOMINAL |
| ABPM | BODY DIAMETER | 1.9850 INCHES MINIMUM AND 1.9900 INCHES MAXIMUM |
| ABWV | SHAFT DIAMETER | 0.2402 INCHES MINIMUM SINGLE SHAFT AND 0.2405 INCHES MAXIMUM SINGLE SHAFT |
| ABXF | SHAFT LENGTH | 0.6930 INCHES MINIMUM SINGLE SHAFT AND 0.7190 INCHES MAXIMUM SINGLE SHAFT |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| AHCG | MAXIMUM TEMP RISE | 65.0 DEG CELSIUS |
| AJSL | BODY SIZE | 23 |
| AJSR | ROTOR INPUT VOLTAGE RATING IN VOLTS | 115.0 NOMINAL |
| AJSS | FREQUENCY IN HERTZ | 60.0 NOMINAL |
| AJST | ROTOR INPUT CURRENT RATING | 210.0 MILLIAMPERES NOMINAL |
| AJSV | ROTOR INPUT ELECTRICAL POWER RATING | 5.0 WATTS NOMINAL |
| AJSW | ZRO RESISTANCE IN OHMS | 132.00 NOMINAL |
| AJSY | ZSO RESISTANCE IN OHMS | 98.00 NOMINAL |
| AJTA | ZRS RESISTANCE IN OHMS | 249.00 NOMINAL |
| AJTE | ZSO-90 RESISTANCE IN OHMS | 94.00 NOMINAL |
| AJVG | MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | 75.00 OUTPUT |
| AJVH | MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 125.00 |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -8.0/+8.0 |
| AJVM | SPLINE TOOTH QUANTITY | 22 SINGLE SHAFT |
| AJVS | ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | 0.50 INCH-OUNCES MAXIMUM |
| AJVV | TORQUE GRADIENT PER ANGULAR DEG | 0.130 INCH-OUNCES NOMINAL |
| AJWQ | PILOT LENGTH | 0.0360 INCHES MINIMUM AND 0.0460 INCHES MAXIMUM |
| AJWR | SHOULDER LENGTH | 0.2520 INCHES NOMINAL |
| AJWV | AFT OF FIRST FLANGE DIAMETER | 1.9985 INCHES MINIMUM AND 1.9995 INCHES MAXIMUM |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | 3.4450 INCHES MAXIMUM |
| AJXA | SPLINE TOOTH DIAMETRAL PITCH | 96 SINGLE SHAFT |
| AJYY | SHAFT THREAD SERIES DESIGNATOR | UNF SINGLE SHAFT |
| AKAF | SHAFT THREAD DIRECTION | RIGHT-HAND SINGLE SHAFT |
| AKAN | SHAFT THREAD CLASS | 2A SINGLE SHAFT |
| CQTM | TERMINAL LOCATION | REAR |
| CQWQ | SHAFT THREAD LENGTH | 0.2660 INCHES NOMINAL SINGLE SHAFT |
| CQXQ | PLUS J ZRO REACTANCE IN OHMS | 494.00 NOMINAL |
| CRGZ | PLUS J ZSO REACTANCE IN OHMS | 311.00 NOMINAL |
| CRKL | PLUS J ZRS REACTANCE IN OHMS | 79.00 NOMINAL |
| CRSJ | SHAFT TYPE | ROUND SINGLE SHAFT |
| CSJY | TRANSFORMATION RATIO | 0.783 ROTOR TO STATOR NOMINAL |
| CTDW | PLUS J ZSO-90 REACTANCE IN OHMS | 94.00 NOMINAL |
| CWBH | SHAFT NOMINAL THREAD SIZE | 0.250 INCHES SINGLE SHAFT |
| TEST | TEST DATA DOCUMENT | 81349-MIL-S-20708 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTI |
| TTQY | TERMINAL TYPE AND QUANTITY | 5 SCREW |
