Buy JJJ97933 Rockwell Automation Inc Part with NSN 5905-01-120-9042
| Part Number: JJJ97933 | Manufacturer: Rockwell Automation Inc | NSN: 5905-01-120-9042 (5905011209042) | NIIN: 011209042 | Item Name : Resistor Variable N | CAGE Code: 01121 | FSC: 5905 Resistors |
Part number JJJ97933 under NSN 5905011209042 and FSC 5905 Resistors is now available in our ready-to-ship-inventory. This part is a Resistor Variable N manufactured by Rockwell Automation Inc under CAGE Code 01121. To receive a quick quote for this part number, fill out the form
All the fields on this form are mandatory and the value of your quote will be determined primarily by your responses to the Need Parts By and Quantity (ea) fields. So make sure that everything is filled out correctly. A sales representative will contact you within 15 minutes of receiving your request.
Upload RFQ Sheet
If you have more than one item, upload your spreadsheet here
NSN Information for Part Number JJJ97933 with NSN 5905-01-120-9042, 5905011209042
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5905-01-120-9042 Item Description: Resistor Variable N | 5905 | 011209042 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| Jjj97933 | 5 | 9 | 5 |
CHARACTERISTICS DATA of NSN 5905-01-120-9042, 5905011209042
| MRC | Criteria | Characteristic |
|---|---|---|
| AAPN | SECTION QUANTITY | 3 |
| AAQL | BODY STYLE | CYLINDRICAL BUSHING MOUNTED |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ABPM | BODY DIAMETER | 1.156 INCHES MAXIMUM |
| ABWV | SHAFT DIAMETER | 0.248 INCHES MINIMUM AND 0.250 INCHES MAXIMUM |
| ABXF | SHAFT LENGTH | 1.500 INCHES NOMINAL |
| ADAP | MOUNTING BUSHING LENGTH | 0.281 INCHES NOMINAL |
| ADAQ | BODY LENGTH | 2.000 INCHES MAXIMUM |
| AEDQ | UNDERCUT DIAMETER | 0.124 INCHES MINIMUM AND 0.126 INCHES MAXIMUM |
| AEDX | SHAFT STYLE | ROUND, STEPPED |
| AEFD | ACTUATOR TYPE | DUAL CONCENTRIC |
| AEFN | NONTURN DEVICE LOCATION | AT 9 OCLOCK |
| AEFP | NONTURN DEVICE RADIUS | 0.526 INCHES MINIMUM AND 0.536 INCHES MAXIMUM |
| AGQL | UNDERCUT LENGTH | 0.500 INCHES NOMINAL |
| AJYN | SCREW THREAD DIAMETER | 0.375 INCHES NOMINAL |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNEF |
| AJYQ | SCREW THREAD QUANTITY PER INCH | 32.0 |
| APXH | TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| AXGY | MOUNTING METHOD | STANDARD BUSHING |
| CBBL | FEATURES PROVIDED | PANEL SEAL |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 1.0 KILOHMS 1ST SECTION |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 5.0 KILOHMS 2ND SECTION |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 5.0 KILOHMS 3RD SECTION |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 120.0 ALL SECTIONS |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 2.25 FREE AIR ALL SECTIONS |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0 TO 10.0 ALL SECTIONS |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 70.0 ALL SECTIONS |
| FEAT | SPECIAL FEATURES | BOTH SHAFTS FLATTED |
| TEST | TEST DATA DOCUMENT | 10001-3178149 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAW |
| TTQY | TERMINAL TYPE AND QUANTITY | 6 TAB, SOLDER LUG |
Top Part Types
Recently Viewed Parts
239-1-2717-3
Featured Aviation
Products
Aircraft Windows Parts
view Detail
Avionics & IFE Parts
View Detail
Helicopter Door & Seating Parts
View Detail
